350 - 354) Welding, Cutting and Soldering Safety (Hot Work) (Standard Operating Procedure) Purpose . Shut down all operation if you discover a fire hazard without a fire watch. Note to paragraph (i).
29 CFR Part 1926 - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION | CFR Fuel gas and oxygen hoses shall be easily distinguishable from each other by color or sense of touch.
1910.252 - General requirements. | Occupational Safety and Health Before entry operations begin, the host employer must provide the following information, if it has it, to the controlling contractor: The hazards or potential hazards in each space or the reason it is a permit space; and. Working with ignition sources near flammable materials is referred to as "hot work." Welding, soldering and cutting are examples of hot work. Grounding circuits shall have resistance low enough to permit sufficient current to flow to cause the fuse or circuit breaker to interrupt the current. Table G-1 - Filter Lenses for Protection Against Radiant Energy.
1926.1153 App A - Methods of Sample Analysis, 1926.1153 App B - Medical Surveillance Guidelines, 1926 Subpart AA - Confined Spaces in Construction. Any employee exposed to the same atmosphere as the welder or burner shall be protected by the same type of respiratory and other protective equipment as that worn by the welder or burner. 1929 wheat penny. The employer shall ensure that employees performing hot work in the open air that involves any of the metals listed in paragraphs (f)(3)(i) and (f)(3)(ii) of this section shall be protected by respirators in accordance with the requirements of 1910.134, and those working on beryllium-containing base or filler metals shall be protected by supplied air respirators, in accordance with the requirements of 1910.134. Oxygen and fuel hoses shall not be interchangeable. The certification must be made available to each employee entering the space or to that employee's authorized representative; and.
Permit Requirements for Construction Activities - Frequently asked English 02/23/2023. 1926 Subpart R App C - Illustrations of Bridging Terminus Points: Non-Mandatory Guidlines for Complying with 1926.757(a)(10) and 1926.757(c)(5). 1926.856 - Removal of walls, floors, and material with equipment. Clogged torch tip openings shall be cleaned with suitable cleaning wires, drills, or other devices designed for such purpose. The person cracking the valve shall stand to one side of the outlet, not in front of it. Hose couplings shall not unlock or disconnect without rotary motion.
0000028894 00000 n
1926.350 (a) (2) When cylinders are hoisted, they shall be secured on a cradle, slingboard, or pallet. 1926.860 - Selective demolition by explosives. Other OSHA regulations, however, do not (although it is often advisable to retain certain documents even if retention is.
VHA Dir 7715, Safety and Health During Construction - Veterans Affairs Surfaces covered with preservative coatings shall be stripped for at least 4 inches (10.16 cm) from the area of heat application or employees shall be protected by supplied air respirators in accordance with the requirements of 1910.134 of this chapter. A hot work permit is a legal document that is required in certain situations where work is being performed that may generate heat, sparks, or flames. Nothing shall be placed on top of a cylinder or associated parts when the cylinder is in use. 1926 Subpart U - Blasting and the Use of Explosives. 0000041672 00000 n
1926.350 Gas Welding and Cutting 1926.350 (a) Transporting, Moving, and Storing Compressed Gas Cylinders 1926.350 (a) (1) Valve protection caps shall be in place and secured. When this is impractical, fire resistant shields shall be provided. 1926.432 - Environmental deterioration of equipment. 0000046103 00000 n
A fire watch is an employee familiar with the work to be done, who watches whenever welding, cutting or other hot work is performed. 1926.1406 - Assembly/Disassemblyemployer procedures--general requirements. 1926.14 - Federal contract for "mixed" types of performance. Some of the rules apply to dangerous jobs like hot worksuch as welding and cuttingrequired for activities as diverse as bio-pharmacy, food production, nuclear power generation, and aviation. To the extent possible, hot work shall be performed in designated locations that are free of fire hazards. 1926.650 - Scope, application, and definitions applicable to this subpart.
PDF Hot Work Permit For Compliance With - California State University San Hot Work Permits & Welding Hazards Safety - SafetyInfo If continuous monitoring is used, the employer must ensure that the monitoring equipment has an alarm that will notify all entrants if a specified atmospheric threshold is achieved, or that an employee will check the monitor with sufficient frequency to ensure that entrants have adequate time to escape. Occupational Safety and Health Administration, Outreach Training Program (10- and 30-hour Cards), OSHA Training Institute Education Centers, Severe Storm and Flood Recovery Assistance. 1926.405 - Wiring methods, components, and equipment for general use. 1926.605 - Marine operations and equipment.
Safety Brief - Hot Work Permits | Environmental Health and Safety 0000006757 00000 n
Standard for Fire Prevention During Welding, Cutting, and Other Hot Work This standard presents provisions to prevent injury, loss of life, and loss of property from fire or explosion as a result of hot work projects such as welding, heat treating, grinding, and similar applications producing or using sparks, flames, or heat. 0000003987 00000 n
67 0 obj
<>
endobj
xref
Surfaces prepared with chlorinated solvents shall be thoroughly dry before welding is performed on them. 0000005574 00000 n
0000065789 00000 n
Use professional pre-built templates to fill in and sign documents online faster. 1926.903 - Underground transportation of explosives. Use of fuel gas. H\n0z Hot work shall not be performed in a confined space until a designated person has tested the atmosphere and determined that it is not hazardous. 1926 Subpart R App G - 1926.502 (b)-(e) Fall Protection Systems Criteria and Practices. Hot electrode holders shall not be dipped in water. 1926 Subpart Y App A - Examples of Conditions Which May Restrict or Limit Exposure to Hyperbaric Conditions, 1926 Subpart Y App B - Guidelines for Scientific Diving, 1926 Subpart Z - Toxic and Hazardous Substances, 1926.1101 App A - OSHA Reference Method - Mandatory, 1926.1101 App B - Sampling and Analysis - Non-mandatory, 1926.1101 App C - Qualitative and quantitative fit testing procedures - Mandatory, 1926.1101 App D - Medical Questionnaires; Mandatory, 1926.1101 App E - Classification of Chest X-Rays - Mandatory, 1926.1101 App F - Work practices and engineering controls for Class I Asbestos Operations - non-mandatory, 1926.1101 App H - Substance Technical Information for Asbestos - Non-Mandatory, 1926.1101 App I - Medical Surveillance Guidelines for Asbestos, Non-Mandatory, 1926.1101 App J - Smoking cessation program information for asbestos, non-mandatory, 1926.1101 App K - Polarized Light Microscopy of Asbestos - Non-Mandatory. 1926.407 - Hazardous (classified) locations. 0000010051 00000 n
Permits can only be issued when the RMS Fire Prevention staff is at work, RMS office hours are weekdays between 8:00 am and 5:00 pm (holidays excluded). Ventilation requirements depend on the metals and compounds used. Torches with such defects shall not be used. Highly flammable coatings shall be stripped from the area to be heated. 1926.700 - Scope, application, and definitions applicable to this subpart. 1926.1127 App A - Substance Safety Data Sheet - Cadmium, 1926.1127 App B - Substance Technical Guidelines for Cadmium, 1926.1127 App C - Qualitative and Quantitative Fit Testing Procedures, 1926.1127 App D - Occupational Health History Interview With Reference to Cadmium Exposure, 1926.1127 App E - Cadmium in Workplace Atmospheres, 1926.1127 App F - Nonmandatory Protocol for Biological Monitoring. For additional details not covered in this subpart, applicable technical portions of American National Standards Institute, Z49.1-1967, Safety in Welding and Cutting, shall apply. Expanding on OSHA's definition, hot work means welding, brazing, cutting, soldering, thawing pipes, using heat guns, torch applied roofing and chipping operations, or the use of spark . Oregon OSHA provides a variety of publications, including; guide books, brochures, forms, hazard alerts, fact sheets, posters, cards, stickers, reports, and checklists on a variety of workplace health and safety topics. 0000007213 00000 n
1926.4 - Rules of practice for administrative adjudications for enforcement of safety and health standards. Communications. %PDF-1.7
%
1926.1441 - Equipment with a rated hoisting/ lifting capacity of 2,000 pounds or less. 1926 Subpart M App A - Determining Roof Widths - Non-mandatory Guidelines for Complying with 1926.501(b)(10), 1926 Subpart M App B - Guardrail Systems - Non-Mandatory Guidelines for Complying with 1926.502(b), 1926 Subpart M App C - Personal Fall Arrest Systems - Non-Mandatory Guidelines for Complying with 1926.502(d), 1926 Subpart M App D - Positioning Device Systems - Non-Mandatory Guidelines for Complying with 1926.502(e), 1926 Subpart M App E - Sample Fall Protection Plan - Non-Mandatory Guidelines for Complying with 1926.502(k), 1926 Subpart N - Helicopters, Hoists, Elevators, and Conveyors. 1926.1420 - Signalsradio, telephone or other electronic transmission of signals. 0000007177 00000 n
OSHA 29 CFR 1910.252 required fire prevention actions for welding/hot works. Manifold hose connections, including both ends of the supply hose that lead to the manifold, shall be such that the hose cannot be interchanged between fuel gas and oxygen manifolds and supply header connections. Areas can be protected with the use of welding pads, blankets, or curtains, clearing combustibles from a 35-ft (11-m) radius space around the hot work, or moving the hot work to an area free of combustibles. 0000038376 00000 n
0000020682 00000 n
When you edit your document, you may need to add text, put on the date, and do other editing. When hot work must be performed in a location that is not free of fire hazards, all necessary precautions shall be taken to confine heat, sparks, and slag so that they cannot contact flammable or combustible material. 1926.552 - Material hoists, personnel hoists, and elevators. When a cable other than the lead mentioned in paragraph (e)(2)(ii) of this section wears and exposes bare conductors, the portion exposed shall not be used until it is protected by insulation equivalent in performance capacity to the original. If the workplace contains one or more permit spaces, the employer who identifies, or who receives notice of, a permit space must: Inform, in a timely manner and in a manner other than posting, its employees' authorized representatives and the controlling contractor of the existence and location of, and the danger posed by, each permit space.
Hot Work Permit Procedures and Date | US EPA Chemical storage guidelines, flammables. $ B1!EFs)60rp(|^PA@F
3:$ |#a
"P5?i&&(0D [Ch-K {;WL+Ss]rf|~ The control apparatus of arc welding machines shall be enclosed, except for operating wheels, levers, and handles. 0000052752 00000 n
0000052551 00000 n
If testing and inspection during that entry demonstrate that the hazards within the permit space have been eliminated or isolated, the permit space may be reclassified as a non-permit confined space for as long as the hazards remain eliminated or isolated; The entry employer must document the basis for determining that all hazards in a permit space have been eliminated or isolated, through a certification that contains the date, the location of the space, and the signature of the person making the determination. Oil and grease hazards. They shall not be intentionally dropped, struck, or permitted to strike each other violently. 1926.20 - General safety and health provisions. Hot work areas shall not be less than 35 feet from combustible materials and combustible waste Ensure that all hot work requests have "Hot Permit Required" selected as the purpose. Cylinders shall not be kept in unventilated enclosures such as lockers and cupboards. 6, 1979, as amended at 55 FR 42328, Oct. 18, 1990; 58 FR 35179, June 30, 1993], Occupational Safety & Health Administration. 1926.1427 - Operator training, certification, and evaluation. 1926.1433 - Design, construction and testing. )*@w>Hk'z&wjf6pM[OKo/!I:;jq:wicxLc;_Ka.\kS,0|;\KeO&)>W0upx!YeY[|I}Ug*uo/c[>/+
jMMM*YD2.Z=Vj
%K2`.\Y+ Valve protection caps shall be in place and secured. A copy of the contractor's written Hot Work Permit Procedures shall be available for EH&S review. California State University - San Marcos (CSUSM) is dedicated to the protection of our Welding Hazards burns & fire impact penetration 1926.30 - Shipbuilding and ship repairing. Ventilation and employee protection in welding, cutting and heating -. If a regulator attached to a cylinder valve will effectively stop a leak through the valve seat, the cylinder need not be removed from the work area. 0000013064 00000 n
The entry employer must then reevaluate the space and reclassify it as a permit space as appropriate in accordance with all other applicable provisions of this standard. 0000002304 00000 n
This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. Pressure regulators, including associated gauges, shall be maintained in safe working order. HOT WORK SAFETY GUIDE . 0000002269 00000 n
Defective hose, or hose in doubtful condition, shall not be used. Oxygen cylinders in storage shall be separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour. Occupational Safety & Health Administration, Occupational Safety and Health Administration, Outreach Training Program (10- and 30-hour Cards), OSHA Training Institute Education Centers, Severe Storm and Flood Recovery Assistance. 1926.1103 - 13 Carcinogens (4-Nitrobiphenyl, etc.). Drums, containers or hollow structures that have contained flammable or combustible substances shall either be filled with water or cleaned, and shall then be ventilated. Suitable fire extinguishing equipment shall be immediately available in the work area and shall be maintained in a state of readiness for instant use.
1926.352 - Fire prevention. - Occupational Safety and Health Administration hot work have been covered with a wet rag. 29 CFR 1910.146 Permit Required - Confined Spaces; 29 CFR 1926.1206 Confined Spaces in Construction
Hotwork & Welding OSHA Safety Program - SafetyInfo Hot Work Requirements | Risk Management Structures or pipelines forming a temporary ground return circuit shall have electrical contact at all joints. USA Distributor of MCM Equipment osha hot work permit requirements 1926 This type of work can include welding, flame cutting, grinding, soldering, brazing and other activities that have the potential to cause fires or explosions. A sign reading "DANGER-PERMIT-REQUIRED CONFINED SPACE, DO NOT ENTER" or using other similar language would satisfy the requirement for a sign. 1910.252 (a) (1) (ii) Guards. CocoDoc makes it very easy to edit your . Welding, Cutting, and Other Hot Work. 1926.1407 - Power line safety (up to 350 kV)assembly and disassembly. If filter lenses are used in goggles worn under the helmet, the shade numbers of both lenses equals the value shown in Table G-1 for the operation. 0000033273 00000 n
0000210649 00000 n
hot work training. 0000052089 00000 n
1926.1211 - Rescue and emergency services. 0000004560 00000 n
How to Create OSHA Work Permits | Lion Technology Fuel gas shall be used only as follows: Before regulators are connected to cylinder valves, the valves shall be opened slightly (cracked) and closed immediately to clear away dust or dirt. Yes, permits for performing hot work are required by both OSHA and the National Fire Protection Association (NFPA), in addition to the local fire code. Hot work. 1926.449 - Definitions applicable to this subpart.
What is A Hot Work Permit: How it Works - certaintysoftware.com Hoses, cables, and other equipment shall be kept clear of passageways, ladders and stairs. 1926.1153 - Respirable crystalline silica. Similar precautions shall be taken regarding cracks or holes in walls, open doorways and open or broken windows. No one except the owner of the cylinder or person authorized by him, shall refill a cylinder. 1926 Subpart L App D - List of Training Topics for Scaffold Erectors and Dismantlers. 1926 Subpart V - Electric Power Transmission and Distribution. Before heat is applied to a drum, container, or hollow structure, a vent or opening shall be provided for the release of any built-up pressure during the application of heat. Cylinders containing oxygen or acetylene or other fuel gas shall not be taken into confined spaces. 1926.1205 (c) If continuous monitoring is not used, periodic monitoring is required. Fires are often the result of the "quick five minute" job in areas not intended for welding or cutting.
1917.152 - Welding, cutting and heating (hot work) [12] (See also In the event that fuel gas should leak from the cylinder valve, rather than from the valve stem, and the gas cannot be shut off, the cylinder shall be properly tagged and removed from the work area. Before entry operations begin, the controlling contractor must: Obtain the host employer's information about the permit space hazards and previous entry operations; and. Hose shall be inspected before use. 1926.23 - First aid and medical attention. 0000035922 00000 n
1926.705 - Requirements for lift-slab construction operations.